NEWHEEK:The most professional manufacturer of medical device products and components

HomeBlog ›High voltage cable for DRX – ray machine

High voltage cable for DRX – ray machine

Recently, we received an inquiry for a high-voltage cable from the sichuan customer who asked DR for high-voltage cable. The customer guessed that the silicon grease was much more. After the temperature rose, the silicon grease melted, so the interface leaked oil.I have changed the cable two or three times in a year, so I want to find a suitable and reliable manufacturer to buy the cable and become a long-term supplier in the future.The customer’s requirement is 75KV and 6m, so the company’s product information will be sent to the customer, and we will wait for the customer’s final reply.The most concerned factors of the customer are the quality assurance and maintenance, and the reply is that it is guaranteed within one year except for force majeure.

High voltage cable is a kind of power cable, which is used for transmission between 1KV and 1000kV. It is mainly used for power transmission and distribution.The components of high voltage cable from inside to outside include conductor, insulation, inner sheath, filling material (armor) and outer insulation.Of course, the armored high-voltage cable is mainly used in the ground, which can resist high pressure on the ground and prevent other external damage.

High voltage cables are typically configured for use on X-ray machines, DR, and CT. They can also be used to connect X-ray tubes to high voltage generators.Cables manufactured by Weifang Huading Electronic Technology Co., LTD. Can be customized for different applications.Two connection modes of straight elbow can be provided.Cable length can be customized, and cable accessories can be ordered separately.

The cable is the bridge between the power supply equipment and the electrical equipment, and plays the role of transmitting electric energy.Due to its wide application, fault is also a common problem. In this paper, the causes of common problems of high voltage cables are summarized. According to the causes of faults, they can be roughly classified into four categories: manufacturer’s manufacturing reasons, construction quality reasons, design unit’s design reasons, and external damage.The above customer’s situation should be the construction quality reason.So in the cable installation also need to be very careful.

If you need any help, please contact us.

 

Author: 肖恩

Contact Us

E-mail:sean@newheek.com

Company:Weifang Newheek Electronic Technology Co., Ltd.

ADD:No.3 Factory Building of No. 13426 Yuqing East Street, Weifang, Shandong, China