Medical flat panel detector with low consumption and high efficiency

At a time when hospital operating cost control is tightening and the number of outpatient consultations continues to rise, as a high-frequency examination department, the energy efficiency ratio of its equipment directly affects the efficiency of diagnosis and treatment circulation in the entire hospital. Medical flat-panel detectors are becoming the core choice for many medical institutions to upgrade their imaging systems by virtue of their low power consumption and improved efficiency brought by technological iterations.


From the perspective of low consumption, medical flat-panel detectors completely bid farewell to the consumption of film, processing fluid and other consumables of traditional screen systems, and there is almost no additional consumable expenditure during the entire life cycle. The optimized cesium iodide scintillator structure greatly improves quantum detection efficiency. The radiation dose required for the same image quality is only 60% of that of traditional systems. It not only reduces radiation damage to doctors and patients, but also reduces the loss rate of the tube. The overall service life of the equipment is extended by more than 30%, and the annual operation and maintenance cost is 60% lower than that of traditional image intensifier solutions.

In terms of efficiency improvement, the 200 millisecond high-speed acquisition mode can achieve 5 image output per second and complete image preview within 3 seconds, completely eliminating the need to wait for development in the darkroom. The wireless model equipped with “hot swap” technology can complete battery replacement within 15 seconds without restarting. With a high-reliability design that is IP57 dustproof and waterproof, it is fully adapted to the high-frequency inspection scenarios of hundreds of cases per day in the radiology department. At the same time, medical flat-panel detectors are compatible with more than 99% of existing DR equipment. There is no need to replace the original tubes and racks. The installation and debugging can be completed in half a day and can be put into clinical use on the same day. The old equipment can be directly upgraded to a digital high-definition imaging system, quickly releasing the department’s diagnostic potential.

For hospitals at all levels, the implementation of a medical flat-panel detector is not a simple hardware update, but a controllable investment to achieve triple optimization of radiation safety, examination efficiency, and operating costs, allowing the radiology department to carry higher diagnosis and treatment traffic under limited resource conditions and bring a more comfortable examination experience to patients.

Author: X Ray Machine Accessories