Wall Mounted Bucky Stand NK17SG/SY: X-Ray Wall Bucky for 14×17″ Cassette & DR

A wall mounted bucky stand is a vertical X-ray bucky fixed to the examination room wall with a track system, saving floor space while keeping the cassette holder and grid at chest height for chest, spine and abdominal radiography. Newheek wall mounted bucky stand models NK17SG and NK17SY accept standard X-ray cassettes, CR IP boards and flat panel detectors in 14″ × 17″ and 17″ × 17″ sizes, and the cassette container can be customized to the detector you already use. The device consists of a bucky tray set, a pair of tracks and a balance device; its grid reaches 40 Lp/cm with a 10:1 grid ratio and 180 cm focus, so film and digital imaging both stay sharp. The overall height is 1500 mm (customizable up to 1800 mm), the width is 455 mm and the minimum travel is 1000 mm. An optional mobile base converts this wall bucky stand into a mobile bucky stand (NK17SY) for departments that need to move the bucky between rooms.

Structure:
The device consists of a bucky tray set, a pair of track and a balance device.
Applicable to different sizes of normal x ray cassettes, CR cassette and DR flat panel detector.

Specification:
1. Overall height 1600mm ( 1800mm or 2000mm can be customized);
2. Width: 455mm;
3. Minimum travel: 1000mm;
4. Max bucky size: free size;
5. Install: mounted on the wall (suggest 500mm above floor)

A mobile base can be selected to become a mobile bucky stand (NK17SYB type). (Size of mobile base: 70×46×11 cm)

Product Diagram

Picture of Wall Mounted Bucky Stand

Picture of Wall Mounted Bucky Stand with CR cassette

HighLight
1. Simplified structure, utilize minimum space;
2. Easy to install, simple operation, easy to disassemble and carry;
3. Small size and light weight, save transportation cost;
4. Unique L-shaped rotary handle locking, easy for lifting the bucky;
5. Easy to focus the center;
6. 35mm-deep bucky slot, suitable for different size of cassettes, CR cassette and flat panel detector.

Wall Mounted Bucky Stand FAQ

What is a wall mounted bucky stand used for?

A wall mounted bucky stand holds the cassette or flat panel detector upright for chest, spine and abdominal radiography, and it saves floor space because it is fixed to the wall with a track system.

Does the wall bucky fit a flat panel detector?

Yes. The NK17SG/NK17SY accepts 14×17″ and 17×17″ cassettes, CR IP boards and flat panel detectors, and the cassette container can be customized to your detector size.

What is the difference between NK17SG and NK17SY?

NK17SG is the standard wall-mounted model; with the optional mobile base it becomes NK17SY, a mobile bucky stand that can be moved between rooms.

Newheek Advantages:

Original manufacturer of  x-ray machine accessories for more than 16 years.

√  Customers could find all kinds of x-ray machine parts here.

√ Offer on line technological support.

√ Promise super product quality with best price and service.

√ Support the third part inspection before delivery.

√ Ensure the shortest delivery time.

Contact us , if you need to order the Wall Mounted Bucky Stand

Email : newheekcn@163.com

Hot Line: +86 19015366638